Scanpod - Mast Pod
Product Overview
The Mast Pod range offers a choice of sizes and materials to allow installation of standard or larger 20/20 maxi style instruments at the mast.
Whether racing or cruising, our Mast Pods give you the best view of your instruments.
- Universal Mount
The range has been designed to fit mast sizes from 76mm (3”) to 223mm (8.8”). Mast arms pivot about semi circular washers and an additional cross-brace provides stiffness preventing sideways movement. - Range of Models
Models to mount 2, 3 or 4 standard nav instruments and 3 or 4 x 20/20 maxi style instruments - Supplied Uncut
As standard you will receive your Scanpod uncut. For larger orders, a factory cutting service is available. - Innovative Sealing
Multiple point seal ensures full instrument protection. Made from a high tear strength silicone, it has a high resistance to heat and UV - Secure Install & Easily Serviced
Tamperproof security screws are supplied. You are only able to open the screws with the tool provided in the kit. The screws fit into threaded inserts so no need to self tap into plastic and thread stays 100% perfect
Installing Maxi instruments? Check out our Carbon Mast Pod. Super lightweight, tough and stylish install - perfect for race boats.
Why Choose a Scanpod? Download the guide now...
A mm (inches) | B mm (inches) | C mm (inches) | D mm (inches) | E mm (inches) | F mm (inches) | |
| SPM-2i | 121 (4.8) | 295 (11.6) | 182 (7.2) | 350 (13.8) | 72 (2.8) | 180 (7.1) |
| SPM-4i | 121 (4.8) | 515 (20.3) | 185 (7.3) | 563 (22.2) | 72 (2.8) | 210 (8.3) |
| SPM-MAXI | 201 (7.9) | 483 (19.0) | 254 (10.0) | 526 (20.7) | 75 (2.95) | 210 (8.3) |
| Filename | |
|---|---|
| Technical information | Download  |
| How to install your Scanstrut | Download |
| Scanstrut brochure | Download |
Find your part number
To find your Scanstrut part number, please select your marine electronics from the options below and click 'Search'.
No accessories are available for this product.
Some answers to frequently asked questions...Ask a question
F.A.Q.'s for Scanpod - Mast Pod
What are Scanpods made from?
They are made from acrylic capped ABS plastic, which makes them tough, corrosion free and UV stable.
What size of mast does the Mast Pod fit?
Our Mast Pods fit a wide range of mast sizes – 76mm (3”) to 223mm (8.8”).
My instruments are not listed in your Part Number search. What Pod do I need?
Please refer to the technical information tab to work out if your screen will fit.
If you are unsure or require further assistance, please contact Scanstrut.
Do I have to cut the front myself?
Scanpods are supplied uncut as standard. However, we do stock a small number of pre-cut models. Please contact Scanstrut for further information.
TIPS ON CUTTING FRONTS – Use jigsaw, but slow it right down so as not to melt the ABS. Move slowly and patiently through the plastic.
How does the unit cool – are there any vents?
We have conducted thermal testing at Raymarine, using their test facilities. We ran 12 and 15” Raymarine screens inside our 12 and 15” pods. They were heated up to 55°C at 5°C intervals where they ‘soaked’ at the temperature for an hour. There were no failures and the electronics continued to work.
Is it okay to drill vent holes in the Pod?
As the units are fully water proof, there is no harm in drilling some vent holes. This will let any moisture and condensation out and let air circulate. I understand that quite a few electronics installers do this to all pods anyway.
General F.A.Q.'s
I have some old electronics, how can I work out if they will fit your products?
If your electronics are not listed in our part number table, please contact Scanstrut as we may be able to assist with compatibility.
Where can I order this product?
Scanstrut products are available worldwide via our network of distributors.
Visit our ‘Where to Buy’ page to find your local dealer.
Can I see this product installed / on display anywhere?
Scanstrut products are displayed at various boat shows throughout the season. Click on 'News & Shows' to view the upcoming boat shows.
Alternatively, find your local dealer on our where to buy page and see if they have a store to visit.
I am upgrading my marine electronics, will I be able to use the same Scanstrut mount?
It all depends on the electronics you are using - please contact Scanstrut for further assistance.
What part no. do I require?
To find your part number, click on the ‘Find your Part Number’ tab.
How much does the product cost?
Pricing for Scanstrut products is available from our network of distributors.
Contact them directly for your local pricing.
I am from the press and I would like more information / pictures on your product.
Good news! Contact our marketing team and they will be happy to help.
Click on 'Contact Us' in the menu bar to send your message.
