Scanpod - Deck Pod

Product Overview

Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse. 

 

 For displays and standard instruments:

  • Range fits 7” - 15” displays
  • Accomodates 3/4 Standard instruments (e.g. ST60)

 Features: 

  • Swivel & Tilt Base
    One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position
  • Best viewing angle
    An adjustable ball joint allows range of movement and multiple mounting angles
  • Added Strength
    Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration
  • Overhead mounting
    Deck Pod models can be overhead mounted. Refer to part number guide for compatibility
  • Hassle Free Install & Service 
    Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.
  • Increased Protection
    Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time.
  • Supplied Uncut
    As standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available.
KEY NEW PRODUCT
 
SPD-4XI-W
  • Deck Pod for 4 x standard instruments / 2 x standard instruments + x 7" screen.

TIP: Wheelhouse fishing boat? Simply rotate to view in wheelhouse or on deck.

 


Dimension diagram


Download information on Scanpod - Deck Pod
Filename
Technical information
How to install your Scanstrut
Scanstrut brochure

Find your part number

To find your Scanstrut part number, please select your marine electronics from the options below and click 'Search'.


Scanpod SuncoverMore information »

Use with: The Scanpod range

UV stable material, pull cord to tighten and adds a level of security.


Some answers to frequently asked questions...

F.A.Q.'s for Scanpod - Deck Pod

What are Scanpods made from?

Acrylic capped ABS plastic. This makes them tough, corrosion free and UV stable.

My screen is not listed in your Part Number search. Which Pod do I need?

Please refer to the 'technical specification' tab which will give you the information you require to see if your screen will fit.

If you are unsure or require further assistance, please contact Scanstrut.

I want to install a combination of screens, how can I work out if they will fit?

You can refer to the technical information to work out which electronics will fit into your Deck Pod.

As a guide though, you can install 1 x 8” screen with 4 x instruments or 1 x 12” screen with 2 x instruments.

Will the new Raymarine wide screens fit into the Deck Pods?

Yes. Please refer to the ‘Find Your Part Number’ tab for your part number.

Do I have to cut the front myself?

Scanpods are supplied uncut as standard. However, we do stock a small number of pre-cut models. Please contact Scanstrut for further information.

TIPS ON CUTTING FRONTS – Watch a video to help you out with cutting your Pod front here http://www.youtube.com/watch?v=9GBNn4fGrOk&feature=channel_video_title

How does the unit cool – are there any vents?

We have conducted thermal testing at Raymarine, using their test facilities. We ran 12" and 15” Raymarine screens inside our 12" and 15” pods. They were heated up to 55°C at 5°C intervals where they ‘soaked’ at the temperature for an hour. There were no failures and the electronics continued to work.

Is it okay to drill vent holes in the Pod?

As the units are fully waterproof, there is no harm in drilling some vent holes. This will let any moisture and condensation out and let air circulate. I understand that quite a few electronics installers do this to all pods anyway.



General F.A.Q.'s

I have some old electronics, how can I work out if they will fit your products?

If your electronics are not listed in our part number table, please contact Scanstrut as we may be able to assist with compatibility.

Where can I order this product?

Scanstrut products are available worldwide via our network of distributors.

Visit our ‘Where to Buy’ page to find your local dealer.

Can I see this product installed / on display anywhere?

Scanstrut products are displayed at various boat shows throughout the season. Click on 'News & Shows' to view the upcoming boat shows.

Alternatively, find your local dealer on our where to buy page and see if they have a store to visit.

I am upgrading my marine electronics, will I be able to use the same Scanstrut mount?

It all depends on the electronics you are using - please contact Scanstrut for further assistance.

What part no. do I require?

To find your part number, click on the ‘Find your Part Number’ tab.

How much does the product cost?

Pricing for Scanstrut products is available from our network of distributors.

Contact them directly for your local pricing.

I am from the press and I would like more information / pictures on your product.

Good news! Contact our marketing team and they will be happy to help.

Click on 'Contact Us' in the menu bar to send your message.


Share your experience with other customers...

* * * * *
Great Product Design!, 3 Aug 2010
By Alan Cliff, Cliff Marine Services Scanstrut has definitely taken their design of their new Deck Pod seriously, with an excellent idea for the mounting the base, requiring very little surface area for attaching the pod on to a dash.



Product Quicklinks