HIDDEN-SC-CW-01F Qi-Wireless Charge Power Boat

Product Information.

The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment, without the need for phone charging cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use onboard, with the unique technology is housed in an IPX6, fully encapsulated and sealed unit.

Working directly with 12/24V systems, ROKK Wireless is ideal for life on the move and is perfect for sail and powerboats and also RV. Easy install, anywhere you need your phone - indoors or out. No more wires! Exceeding the latest and highest standards of the Qi wireless protocol, ROKK Wireless is independently certified to deliver ultra-safe, wireless charging anywhere onboard.

Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps.

Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments. With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions.

Sub-surface, hidden from view but always ready to charge. Engineered to be installed under the surface and leave the top surface un-cluttered and looking perfect. Simply etch in your logo to identify the charge location. Ideal for GRP or wood, the unit can be installed under tables, cabinets, consoles or worktops. The installation system is simple to install and works with a variety of panel depths and materials.

Safety

Foreign object detection system
Thermal management system
UV stable

Technical

IPX6 waterproof sealed unit
High friction non-slip pad
Qi-certified
Marine-grade materials

Install

Easy install
No sealant required

Our Testing Ethos

Our testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, we design our products to be able to thrive in the harshest of outdoor environments.

Before any product is released, it must pass through our rigorous testing program which involves assessments in electrical, mechanical, U.V., corrosion, thermal, and waterproof categories. To ensure the highest level of accuracy, testing is conducted both internally and by independent ISO accredited test houses.

Our commitment to quality has earned us the approval of renowned names such as Mercury Marine, Grady White Boats, Boston Whaler, Winnebago, Airstream and many more. To learn more about our testing program and certifications, please feel free to reach out to us.

View Product Tests View All Tests

QI

The world’s No.1 wireless charging standard, this ensures our chargers are built to an extreme level of safety and ensures compatibility of all phones.

IP Test

Water and dust protection under test laboratory conditions to international IP standards. We test between IPX4 (waterjet) and IP68 (submersion).

Accelerated UV Material Test

We accelerate the effects of UV exposure to replicate our products usage in extreme tropical climates. We do this to ensure parts do not become brittle, discolour or fail over time.

Cable Bend Test

Electrical products are bolted into a specially designed automated jig to mechanically bend the cable -45° to +45° for 3000 cycles. This ensures cables will not fail even after prolonged use.

Thermal Chamber Test

Laboratory chamber running from -40°C (-40°F) to +85°C (185°F) and back to -40°C (-40°F) for 120 cycles, this accelerates material ageing to simulate real world environment.

Cable Twist Test

Electrical products are bolted into a specially designed automated jig to mechanically twist the cable -45° to +45° for 3000 cycles. This ensures cables will not fail even after prolonged use.

Temperature Chamber Test

Product placed in a laboratory chamber at high temperatures to ensure our products continue to perform as designed.

Corrosion Test

100-hours of a special formula salt spray that simulates accelerated marine environmental effects on the product.

On Water Charge Test

Using real life on water temperature data to ensure devices will continue to charge at an acceptable speed in extreme cold and hot temperatures.

On Water Testing Global

Similar to SCA standard on water testing, however we select locations and vessels for more varied and challenging environmental conditions.

FEA Analysis

Finite Element Analysis, simulates the behaviour of the design in virtual conditions to allow us to optimise the design before prototyping and physical testing.

C Tick

An identification trademark registered to the ACMA indicates that the equipment complies with the relevant EMC standard.

CE / UKCA

Signifies that our products have been assessed to meet high safety, health, and environmental protection requirements.

ECE R10

The global automotive standard recognised by RV and Marine OEMs to ensure electrical devices are suitable to use in automotive builds.

FCC

A legal requirement to sell any communication device (RF) in the United States of America.

Humidity Chamber Test

Similar to our brutal SCA Thermal Chamber Test, but we’ve added humidity to make it even more punishing.

Material Test

Positive Material Identification (PMI) ensures consistent quality of 316 Stainless Steel and Aluminium products. This controls strength and environmental performance.

PROP65

Confirms the exclusion of substances of very high concern in our products, with the aim of protecting human and animal health.

ROHS

Confirms the levels of substances and chemicals in our electrical products, with the aim of protecting human and animal health. 

¿El cargador oculto puede cargar a través de cualquier material?

El cargador oculto puede cargar a través de cualquier superficie siempre y cuando no sea metálica y esté instalado dejando solo 3mm de material

¿Es segura la carga inalámbrica cuando el cargador está mojado?

Sí, la carga que pasa por el agua hasta su teléfono no es peligrosa para usted ni para su teléfono.

¿Puede cargar mi tableta?

La gama inalámbrica de ROKK ha sido diseñada para cargar solo teléfonos, aunque hay algunas tabletas de carga inalámbrica en el mercado, una potencia de 5W no es suficiente para cargar completamente un dispositivo de pantalla grande como una tableta.

¿Es necesario utilizar el anillo de agarre de goma incluido en el embalaje para que el cargador funcione?

No, el anillo de agarre se proporciona solamente como un marcador y/o como agarre para su teléfono. Puede marcar la superficie usted mismo o dejarla completamente limpia, simplemente es más fácil alinear el teléfono con la parte central del cargador con el indicador en la superficie de carga.

¿Qué es la carga Qi?

Qi™ es una tecnología inalámbrica que utiliza la carga inductiva. La gama inalámbrica de ROKK ha sido diseñada para ser compatible con Qi. Qi ha sido adoptado por Apple, Samsung y todas las demás grandes marcas de teléfonos.

¿Por qué no tiene carga rápida?

los cargadores rápidos de 10W no cargan el teléfono el doble de rápido que los de 5W, en general son menos eficientes. El cargador de 10W genera más calor, que combinado con el entorno exterior, es probable que active la función de seguridad de corte térmico de su teléfono. Hemos tomado la decisión de utilizar una tecnología de 5W que puede ofrecer una carga ligeramente más lenta, pero que permite que el teléfono siga utilizándose y recibiendo carga en el exterior

¿Se puede instalar utilizando la red eléctrica?

La gama ROKK Wireless está diseñada para sistemas eléctricos de 12/24V, pero podemos suministrar transformadores que permitan su adaptación a la red eléctrica. Dado que cada país tiene sus propias especificaciones de potencia, póngase en contacto con [email protected] para obtener más información.

Hidden 10W