ROKK Charge Pro

ROKK Charge Pro

  • IPX6 waterproof rating 
  • Featuring a USB-A and USB-C charging port
  • Fast charge
  • Waterproof with 1, 2 and even no cables plugged in.
  • Ultra low profile

SC-USB-03 

Waterproof On-Board Charging,

Whatever The Weather. 

ROKK Charge Pro is the ultimate onboard USB charger. Featuring a USB-A and USB-C charging port housed in an IPX6 waterproof design, this is the only USB-C charger on the market that remains waterproof while in use.

Product Information.

Say hello to fast charging! The unique design charges up to 36W on 12V systems and 60W on 24V systems. This makes it ideal for charging modern laptops via the USB-C port. It's also twice as fast when charging larger tablets, designed to easily charge an iPad Pro and iPhone at the same time.

Perfect for where space is at a premium, ROKK Charge Pro has a sleek, ultra-compact design with a click-and-lock lid allowing the USB to remain waterproof while in use. Constructed from premium, marine-grade materials, ROKK Charge Pro is IPX6 waterproof making it completely wash-down ready.

 

USB – C output:
60W max on 24V system
36W max on 12V system

USB – A output:
36W max

The install cut-out matches those of standard USB sockets for easy retrofit or swap of an existing USB charger, allowing you to keep up with the heavier power draws of modern electronic devices. 

Universal
• Universal fit for any USB-A or USB-C connectors.
• Fast charge (60W max) up to 2 devices at a time.
• Easy Install, using standard USB mounting hole - 29mm (1 1/8”) 

Washdown Proof
IPX6 waterproof with the lid closed.

Marine Ready
• Anti-corrosion coating on the circuit board.
• UV resistant.
• 316 stainless hinge and spring.

 

Electrical Information

  • Input voltage: 10-30V DC (12/24V System)
  • Input current Max: 6A (10A fuse recommended) 
  • Standby power draw: 0.01W

 

Important information
The charge cable supplied with your device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast-charging laptops. 

 

Our Testing Ethos

Our testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, we design our products to be able to thrive in the harshest of outdoor environments.

Before any product is released, it must pass through our rigorous testing program which involves assessments in electrical, mechanical, U.V., corrosion, thermal, and waterproof categories. To ensure the highest level of accuracy, testing is conducted both internally and by independent ISO accredited test houses.

Our commitment to quality has earned us the approval of renowned names such as Mercury Marine, Grady White Boats, Boston Whaler, Winnebago, Airstream and many more. To learn more about our testing program and certifications, please feel free to reach out to us.

View Product TestsView All Tests

IP Test

IP Test

Water and dust protection under test laboratory conditions to international IP standards. We test between IPX4 (waterjet) and IP68 (submersion).
Accelerated UV Material Test

Accelerated UV Material Test

We accelerate the effects of UV exposure to replicate our products usage in extreme tropical climates. We do this to ensure parts do not become brittle, discolour or fail over time. 
Cable Bend Test

Cable Bend Test

Electrical products are bolted into a specially designed automated jig to mechanically bend the cable -45° to +45° for 3000 cycles. This ensures cables will not fail even after prolonged use. 
Thermal Chamber Test

Thermal Chamber Test

Laboratory chamber running from -40°C (-40°F) to +85°C (185°F) and back to -40°C (-40°F) for 120 cycles, this accelerates material ageing to simulate real world environment. 
Cable Twist Test

Cable Twist Test

Electrical products are bolted into a specially designed automated jig to mechanically twist the cable -45° to +45° for 3000 cycles. This ensures cables will not fail even after prolonged use. 
Temperature Chamber Test

Temperature Chamber Test

Product placed in a laboratory chamber at high temperatures to ensure our products continue to perform as designed.
Corrosion Test

Corrosion Test

100-hours of a special formula salt spray that simulates accelerated marine environmental effects on the product.
On Water Charge Test

On Water Charge Test

Using real life on water temperature data to ensure devices will continue to charge at an acceptable speed in extreme cold and hot temperatures.  
On Water Testing Global

On Water Testing Global

Similar to SCA standard on water testing, however we select locations and vessels for more varied and challenging environmental conditions.  
FEA Analysis

FEA Analysis

Finite Element Analysis, simulates the behaviour of the design in virtual conditions to allow us to optimise the design before prototyping and physical testing.
C Tick

C Tick

An identification trademark registered to the ACMA indicates that the equipment complies with the relevant EMC standard. 
CE / UKCA

CE / UKCA

Signifies that our products have been assessed to meet high safety, health, and environmental protection requirements. 
ECE R10

ECE R10

The global automotive standard recognised by RV and Marine OEMs to ensure electrical devices are suitable to use in automotive builds.
FCC

FCC

A legal requirement to sell any communication device (RF) in the United States of America. 
Humidity Chamber Test

Humidity Chamber Test

Similar to our brutal SCA Thermal Chamber Test, but we’ve added humidity to make it even more punishing.  
Material Test

Material Test

Positive Material Identification (PMI) ensures consistent quality of 316 Stainless Steel and Aluminium products. This controls strength and environmental performance. 
PROP65

PROP65

Confirms the exclusion of substances of very high concern in our products, with the aim of protecting human and animal health.
ROHS

ROHS

Confirms the levels of substances and chemicals in our electrical products, with the aim of protecting human and animal health.  
Prodotti correlati
SC-USB-01

SC-USB-01

  • Classificazione impermeabile IPX4
  • Impermeabile con 1, 2 o anche 0 cavi collegati
  • La presa funziona con qualsiasi connettore USB di tipo A
  • Le dimensioni standard del bariletto si adattano anche alle prese USB esistenti.
Vedi prodotto
ROKK Charge+

ROKK Charge+

  • Classificazione impermeabile IPX6
  • Ricarica veloce
  • Impermeabile con 1, 2 e anche senza cavi collegati.
  • Profilo ultrasottile
Vedi prodotto
Accessori
Ricarica RKK/Cavo di sincronizzazione

Ricarica RKK/Cavo di sincronizzazione

  • Disponibile in due lunghezze resistenti: 60 cm o 2 M
  • Opzioni connettori Apple Lightning o Micro USB
  • Tutti i modelli sono dotati di un core con specifiche elevate che garantisce una ricarica/sincronizzazione super veloce
See Product
Frequently Asked Questions

Cosa rende ROKK Charge + fino a 3 volte più veloce rispetto ad altre prese USB?

Il PCB (circuito stampato) situato all'interno del ROKK Charge+ consente al dispositivo di ricevere una carica simile a quella di un caricabatterie di rete.

Cosa rende diversa la gamma di dispositivi di ricarica Scanstrut dagli altri cosiddetti "caricatori USB impermeabili" sul mercato?

La nostra gamma di caricatori USB è impermeabile anche con presa in uso. Altri caricatori USB sono impermeabili solo quando non vengono utilizzati ed inserita una copertura.

Posso sostituire una vecchia presa USB con una versione Scanstrut?

Nella maggior parte dei casi la sostituzione è facile, basta rimuovere la vecchia versione e le nostre prese USB si adatteranno al foro esistente, aggiungere viti autofilettanti ove necessario.