Ultra-fast USB charging for the next generation boater.
Flip Pro is designed for use with either a 12V or 24V input and features 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection and the fastest charging for your device onboard.
Flip Pro is designed for use with either a 12V or 24V input and features 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection for any device and the fastest charging for your device onboard.
When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements. When charging, it quickly locks open to protect your cables when plugged in.
Featuring a super-compact footprint, Flip Pro is constructed from premium, marine-grade materials. and is IPX4 waterproof, making it completely washdown-ready.
Flip Pro is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops via the USB-C port. It’s also 2x faster for charging large tablets and is designed to effortlessly charge both an iPad Pro & iPhone at the same time.
USB – C output:
60W max on 24V system
36W max on 12V system
USB – A output:
The install cut-out matches those of standard USB sockets for easy retrofit or swap of an existing USB charger, allowing you to keep up with the heavier power draws of modern electronic devices.
• Universal fit for any USB-A or USB-C connectors.
• Fast charge (60W max) up to 2 devices at a time.
• Easy Install, using standard USB mounting hole - 29mm (1 1/8”)
IPX4 waterproof with the cover closed.
• Internal anti-corrosion protective coating
• UV resistant.
• 316 stainless hinge and spring.
- Input voltage: 10-30V DC (12/24V System)
- Input current Max: 6A (10A fuse recommended)
- Standby power draw: 0.01W
The charge cable supplied with your device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast charging laptops.
What makes ROKK charge + up to 3x faster than other USB sockets?
The PCB (printed circuit board) inside the ROKK Charge+ enables the device to recive similar charge as it would from a mains power charger.
Why is the Scanstrut charge range different to other so called "waterproof USB chargers" on the market?
Our range of USB chargers remains waterproof even when the socket is in use. Other USB chargers are only waterproof when not being used and the cover fitted.
Can I replace an old USB socket with a Scanstrut version?
In most case it’s an easy swap, just remove the old version and our USB barrels will fit into th existing hole and add self tapping screw/s where required.