SC-USB-F4

Our revolutionary ultra-fast combination USB A & USB C charger. 

Flip Pro Plus is designed for use with either a 12V or 24V input and features 1x 60W USB-C and 1x USB-A charging port for maximum choice and performance. 

Product Information.

The Flip Pro Plus is the newest product in the series of Flip Pro. A combination of our most sought-after chargers, designed to be used with either a 12V or 24V input and features 1x USB-A and 1x USB-C, to create a rapid universal ultra-fast charging solution.  

The Flip Pro Plus is a redesign of our classic Flip Pro, to ensure your boat aesthetics stay aligned with our other designs in the Flip Pro range.  When not in use, the spring-loaded caps remain tightly closed, protecting the ports from the elements.

Featuring a super-compact footprint that matches the rest of our Flip Pro range and is constructed from premium, marine-grade materials. Flip Pro Plus has been rigorously tested and is IPX4 waterproof, making it completely washdown-ready.

Flip Pro Plus is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V. With a PD chip, this charger is truly universal, making it perfect for charging modern laptops via the USB-C port. It is also designed for charging large tablets, offering an effortless charge for both an iPad Pro & iPhone at the same time.

USB – C output:
60W max on 24V system
36W max on 12V system

USB-A – A output:
36W max

The install cut-out matches our Flip Pro Max, Duo and Multi USB sockets (32mm (1 1/8”) for a seamless look across the range. Now you’re able to keep up with the heavier power draws of modern electronic devices while keeping premium, universal USB chargers all around the boat.

Universal
• Universal fit for any USB-A or USB-C connectors.
• Fast charge (60W max) up to 2 devices at a time
• Easy Install, using standard USB mounting hole - 32mm (1 1/8”) and is supplied with a front mount bezel

Washdown Proof
IPX4 waterproof with the cover closed

Marine Ready
• Internal anti-corrosion protective coating
• UV resistant
• 316 stainless hinge and spring

Electrical Information
Input voltage: 10-30V DC (12/24V System)
Input current Max: 6A (10A fuse recommended) 
Standby power draw: 0.01W

Important information
The charge cable supplied with your device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast-charging laptops. 

Frequently Asked Questions

What makes ROKK charge + up to 3x faster than other USB sockets?

The PCB (printed circuit board) inside the ROKK Charge+ enables the device to recive similar charge as it would from a mains power charger.

Why is the Scanstrut charge range different to other so called "waterproof USB chargers" on the market?

Our range of USB chargers remains waterproof even when the socket is in use. Other USB chargers are only waterproof when not being used and the cover fitted.

Can I replace an old USB socket with a Scanstrut version?

In most case it’s an easy swap, just remove the old version and our USB barrels will fit into th existing hole and add self tapping screw/s where required.