Built from highly polished 316 marine grade stainless steel for that high end finish.
Improve the pitch of the Radar while the boat is up on the plane.
Designed to mount an Open Array or Radar, Satcom & camera with or without Navlights to be mounted together.
A single combination mounting solution for radar, lights, GPS/ VHF antennas, cameras or search lights.
Manufactured from a Single piece composite GRP moulding for a high strength, corrosion-free mounting.
Based on a unique ellipse extrusion, this mount enables you to raise your Satcom antenna clear of obstructions.
Designed to fit
Designed to be bolted directly on to the deck, cabin roof, low arch or other areas where some elevation is required.
Designed to safely pivot your Satcom installation through 180°, significantly lowering the height of the installation.
Mount your phone to any rigid, clean, smooth, non-textured surface with our heavy duty suction cup.
Mount your phone onto any rail from 19-34mm (¾-1¼”) in diameter.
Our super strong 3M self-adhesive base lets you mount your phone to any flat surface.
Mount your phone onto square & round sections - minimum diameter 60mm (2.3") and maximum diameter 100mm (3.9").
Mount your Tablet to any rigid, clean, smooth, non-textured surface with our heavy duty suction cup.
Mount your Tablet by screwing onto any flat surface.
Mount your Tablet onto any rail from 19-34mm (¾-1¼”) in diameter.
Our super strong 3M self-adhesive base lets you mount your tablet to any flat surface.
Mount your Tablet onto square & round sections - minimum diameter 60mm (2.3") and maximum diameter 100mm (3.9").
Available in 2 heights and designed to fit the most up to date cameras.
Designed for mounting lights, cameras, GPS/ VHF antenna in one premium installation.
Designed to fit the most up to date open array's from the world's biggest marine electronics brands.
Pole mount for upto 4 GPS/VHF antennas, with the cables routed internally in the pole.
T-Bar mount for upto 4 GPS/ VHF antennas. 316 stainless steel with internal cable routing and able to mount onto a variety of surfaces.
Simply release the lever, swivel and tilt to suit your perfect viewing angle.
Fit to any rail 25-33mm (1-1 ¼”) for a secure mounting for your display.
Fit to any rail 25-33mm (1-1 ¼”) for a fully adjustable rail mount for your display.
Screw down to any surface for a fully adjustable mount for your display.
Mount your display or instrument on top of a rail, saving you space onboard.
12/24V waterproof USB charger, with a IPX4 waterproof rating and small mounting footprint.
The ultimate 12/24V waterproof USB charger, featuring Fast Charge Technology, an IPX6 waterproof rating and an ultra-low profile.
The ultimate rugged outdoor USB charge/sync cable range. Designed and engineered by the outdoor technologies experts.
Sub-surface, hidden from view, pocket or bond install Ideal for GRP or wood.
With factory fit in mind, seamlessly integrates into your interior or exterior design.
Ultra grippy, low-profile charge pad , non-slip designed for any surface.
The easiest to install, ultra grippy, non-slip surface with a contemporary look.
Houses & wirelessly charges, perfect for integration into consoles, seating, cabinetry.
Mount & wirelessly charge, high friction grip with single handed docking.
Mount & wirelessly charge, high friction grip and rotate through 90 degrees.
Convert your old phone to wireless charge, lightning or micro USB connection, fits in between case & phone.
Perfect for solar panels, light bars, lights and other rooftop electronics. Available in grey, black high-impact plastic.
For multiple cables up to Ø15mm (0.71") and built from marine-grade aluminium.
Waterproof connection for up to multiple electrical cables wtih 5 modular terminal blocks and 5 terminations.
Waterproof connection for up to multiple electrical cables wtih 10 screw-down terminals, offering 10 terminations
Cost-effective and space-saving solution for installing your radar to your mast.
Mount your radar onto the deck or transom of your boat. Supplied as a complete kit, you will have everything you need for a quick and easy installation
Available forward or aft Backstay, designed to fit the most up to date radars.
Our self levelling radar mast mount ensures your radar stays level with the horizon at all times for optimum performance.
Our pole leveller kit comes everything you need to install your radar onto the stern of any sailing boat.
Mount your Satcom onto the deck or transom of your boat. Supplied as a complete kit, you will have everything you need for a quick and easy installation
Mount your phone by screwing onto any flat surface.
Mount your phone onto square & round sections - minimum diameter 60mm (2.3") and maximum diameter 100mm (3.9")
Mount your tablet onto any rail from 19-34mm (¾-1¼”) in diameter.
Mount your tablet by screwing onto any flat surface.
Mount your tablet to any rigid, clean, smooth, non-textured surface with our heavy duty suction cup.
Mount your tblet onto square & round sections - minimum diameter 60mm (2.3") and maximum diameter 100mm (3.9").
Install your MFD onto any standard or curved rail, perfect for installations where there is limited space available.
Our Arm Pod allows you to install your MFD onto any standard or curved rail.
Rail mount for single GPS / VHF antenna, 316 stainless steel with Internal cable routing.
Perfect for installations where there is limited space available.
Mount up to 3 standard instruments on your mast.
Let us help you select the best:mount.charge.seal.
FIT MY DEVICE
Perfect for solar panels, light bars,
lights and other rooftop electronics.
Available in grey, black high-impact plastic.
Ultra grippy, low-profile charge pad, non-slip designed for any surface.
Low profile, perfect for tight spaces. Available in grey, black high-impact plastic.
Perfect for solar panels and other low profile electronic installations
