SC-CW-11F 

Dock. Charge. Connect.

Nano 10W is our smallest wireless phone charging mount. It squeezes big features into a tiny package!

Designed to be installed where space is at a premium, Nano 10W holds and wirelessly charges your phone at the same time!

The ultra-compact design can be installed and used in any orientation, unlocking new charging possibilities. Now you can keep your phone within reach, charged and ready to go.

Product Information.

Our IPX6 waterproof, 12/24V wireless range enables phone charging for the outdoor environment, without the need for cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use onboard.

Perfect for boat consoles or any vehicle working outside in the elements, Nano 10W has been designed to fit even the largest phones.

Nano 10W features Qi-certified wireless charging technology with foreign object detection and thermal cut-off to guarantee your devices are kept safe and charged while onboard.

Our newly upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Nano 10W is compatible with all wireless charging-enabled phones of all sizes from all major brands. Charging is also possible through non-metallic, waterproof cases.

Usage
Nano 10W is at home in coastal and freshwater. If you require a wireless phone charging mount for rough conditions, we recommend our ROKK Wireless – Active 10W or Edge 10W.  

Testing 
ROKK Wireless Nano has been subjected to a high level of environmental, vibration, impact and on-water testing programs. This is combined with our world-renowned expertise in waterproofing technologies, UV stabilization techniques and premium-grade materials, ensuring Nano 10W is up to the challenge of life outdoors.

Installation
Installation is simple on any boat, RV, ATV or outdoor location. Four screws secure the unit onto any flat surface with a simple installation guide and drilling template. For the best phone grip performance, a vertical installation is recommended. The charger is easy to clean and can be washed down with fresh water.

Testing Mark

Our Testing Ethos

Our testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, we design our products to be able to thrive in the harshest of outdoor environments.

Before any product is released, it must pass through our rigorous testing program which involves assessments in electrical, mechanical, U.V., corrosion, thermal, and waterproof categories. To ensure the highest level of accuracy, testing is conducted both internally and by independent ISO accredited test houses.

Our commitment to quality has earned us the approval of renowned names such as Mercury Marine, Grady White Boats, Boston Whaler, Winnebago, Airstream and many more. To learn more about our testing program and certifications, please feel free to reach out to us.

View Product TestsView All Tests

QI

QI

The world’s No.1 wireless charging standard, this ensures our chargers are built to an extreme level of safety and ensures compatibility of all phones.  
IP Test

IP Test

Water and dust protection under test laboratory conditions to international IP standards. We test between IPX4 (waterjet) and IP68 (submersion).
Accelerated UV Material Test

Accelerated UV Material Test

We accelerate the effects of UV exposure to replicate our products usage in extreme tropical climates. We do this to ensure parts do not become brittle, discolour or fail over time. 
Cable Bend Test

Cable Bend Test

Electrical products are bolted into a specially designed automated jig to mechanically bend the cable -45° to +45° for 3000 cycles. This ensures cables will not fail even after prolonged use. 
Thermal Chamber Test

Thermal Chamber Test

Laboratory chamber running from -40°C (-40°F) to +85°C (185°F) and back to -40°C (-40°F) for 120 cycles, this accelerates material ageing to simulate real world environment. 
Cable Twist Test

Cable Twist Test

Electrical products are bolted into a specially designed automated jig to mechanically twist the cable -45° to +45° for 3000 cycles. This ensures cables will not fail even after prolonged use. 
Temperature Chamber Test

Temperature Chamber Test

Product placed in a laboratory chamber at high temperatures to ensure our products continue to perform as designed.
Corrosion Test

Corrosion Test

100-hours of a special formula salt spray that simulates accelerated marine environmental effects on the product.
On Water Charge Test

On Water Charge Test

Using real life on water temperature data to ensure devices will continue to charge at an acceptable speed in extreme cold and hot temperatures.  
On Water Testing Global

On Water Testing Global

Similar to SCA standard on water testing, however we select locations and vessels for more varied and challenging environmental conditions.  
FEA Analysis

FEA Analysis

Finite Element Analysis, simulates the behaviour of the design in virtual conditions to allow us to optimise the design before prototyping and physical testing.
C Tick

C Tick

An identification trademark registered to the ACMA indicates that the equipment complies with the relevant EMC standard. 
CE / UKCA

CE / UKCA

Signifies that our products have been assessed to meet high safety, health, and environmental protection requirements. 
ECE R10

ECE R10

The global automotive standard recognised by RV and Marine OEMs to ensure electrical devices are suitable to use in automotive builds.
FCC

FCC

A legal requirement to sell any communication device (RF) in the United States of America. 
Humidity Chamber Test

Humidity Chamber Test

Similar to our brutal SCA Thermal Chamber Test, but we’ve added humidity to make it even more punishing.  
Material Test

Material Test

Positive Material Identification (PMI) ensures consistent quality of 316 Stainless Steel and Aluminium products. This controls strength and environmental performance. 
PROP65

PROP65

Confirms the exclusion of substances of very high concern in our products, with the aim of protecting human and animal health.
ROHS

ROHS

Confirms the levels of substances and chemicals in our electrical products, with the aim of protecting human and animal health.  
Frequently Asked Questions

Is Wireless Charging safe when the charger is wet?

Yes, the charge passing through the water into your phone is not dangerous to you or your phone.

What is Qi™ charging?

Qi™ is a wireless technology that uses inductive charging. The ROKK wireless range has been engineered to be Qi compatible. Qi has been adopted by Apple, Samsung and all other major phone brands.

Why is it not fast charging?

10W fast chargers do not charge the phone twice as quick as 5W, overall they are less efficient. The 10W charger will generate more heat, that combined with the outdoor environment, it’s likely to trigger your phones thermal cut out safety feature. We took the decision to use 5W technology that may deliver slightly slower charge, but allows your phone to continue to be used and receive charge outdoors.

Can it be installed using mains power?

The ROKK Wireless range is designed for 12/24V electrical systems, but we can supply transformers that enable them to be fitted to a mains supply. Because each country has its own Power specification please contact [email protected] for more information.

Does Nest have to be installed into a vertical surface?

To ensure your phone stays over the charging coil and for water to self-drain it's recommended. However, you can install up to 5 degrees either side of vertical to achieve the same results.