












ROKK Charge+
SC-USB-02
Waterproof On-Board Charging, Whatever The Weather.
The ultimate rapid charge waterproof USB charger with dual-socket connectivity that can charge devices up to 3x faster than standard USB sockets. Featuring an ultra-low profile, that’s perfect for any outdoor application.
Waterproof On-Board Charging, Whatever The Weather.
The ultimate rapid charge waterproof USB charger with dual-socket connectivity that can charge devices up to 3x faster than standard USB sockets. Featuring an ultra-low profile, that’s perfect for any outdoor application.
Designed with a universal fit for any USB Type-A connector, this device seamlessly charges 2 devices at a time.
Quick and easy to install with a hole saw, the ROKK Charge+ enables quick retrofitting, bringing your van up to date, and meeting the needs of your power-hungry devices in no time!
The low profile form allows for more installation locations, as space is always a premium on a van! The cover also works as an anti-snag, aligning the cables and keeping inside and outside space looking tidy and sleek.
Key Features
- Ultra low profile: only 29mm high, 94mm long
- Standard barrel size also fits existing USB sockets
- Universal fit for any USB Type-A connector
- Charge up to 2 devices at a timeEasy Install
- Click & Lock Lid
- Output current 4.2A (total)
- PX6 waterproof with the cover closed
- Up to 3x faster than standard USB sockets
- Waterproof with 1, 2, and even no cables plugged in
- Anti-corrosion coating on the circuit board
- UV resistant
- 316 stainless hinge and spring
Electrical Information
Input Voltage | 10-32V DC (12/24V system) |
Input Current | Max 2.5 A |
Output (Type A) | 5V⎓1.2A x2 |
Standby Draw | 0.01W |
Certification | CE, ROHS, UKCA |
Installation Guide
If you can't find the answer to your question, please get in touch and one of our product experts will get back to you.
What makes ROKK charge + up to 3x faster than other USB sockets?
The PCB (printed circuit board) inside the ROKK Charge+ enables the device to recive similar charge as it would from a mains power charger.
Why is the Scanstrut charge range different to other so called "waterproof USB chargers" on the market?
Our range of USB chargers remains waterproof even when the socket is in use. Other USB chargers are only waterproof when not being used and the cover fitted.
Can I replace an old USB socket with a Scanstrut version?
In most case it’s an easy swap, just remove the old version and our USB barrels will fit into the existing hole and add self tapping screw/s where required.
The testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, Scanstrut design products to be able to thrive in the harshest of outdoor environments.
Before any product is released, it must pass through the rigorous testing program which involves assessments in electrical, mechanical, U.V., corrosion, thermal, and waterproof categories. To ensure the highest level of accuracy, testing is conducted both internally and by independent ISO accredited test houses.
This commitment to quality has earned Scanstrut the approval of renowned names such as Mercury Marine, Grady White Boats, Boston Whaler, Winnebago, Airstream and many more. To learn more about the SCA testing program and certifications, get in touch.

IP Test
Water and dust protection under test laboratory conditions to international IP standards. We test between IPX4 (waterjet) and IP68 (submersion).
Accelerated UV Material Test
We accelerate the effects of UV exposure to replicate our products usage in extreme tropical climates. We do this to ensure parts do not become brittle, discolour or fail over time.
Cable Bend Test
Electrical products are bolted into a specially designed automated jig to mechanically bend the cable -45° to +45° for 3000 cycles. This ensures cables will not fail even after prolonged use.
Thermal Chamber Test
Laboratory chamber running from -40°C (-40°F) to +85°C (185°F) and back to -40°C (-40°F) for 120 cycles, this accelerates material ageing to simulate real world environment.
Cable Twist Test
Electrical products are bolted into a specially designed automated jig to mechanically twist the cable -45° to +45° for 3000 cycles. This ensures cables will not fail even after prolonged use.
Temperature Chamber Test
Product placed in a laboratory chamber at high temperatures to ensure our products continue to perform as designed.
Corrosion Test
100-hours of a special formula salt spray that simulates accelerated marine environmental effects on the product.
On Water Charge Test
Using real life on water temperature data to ensure devices will continue to charge at an acceptable speed in extreme cold and hot temperatures.
On Water Testing Global
Similar to SCA standard on water testing, however we select locations and vessels for more varied and challenging environmental conditions.
FEA Analysis
Finite Element Analysis, simulates the behaviour of the design in virtual conditions to allow us to optimise the design before prototyping and physical testing.
C Tick
An identification trademark registered to the ACMA indicates that the equipment complies with the relevant EMC standard.
CE / UKCA
Signifies that our products have been assessed to meet high safety, health, and environmental protection requirements.
ECE R10
The global automotive standard recognised by RV and Marine OEMs to ensure electrical devices are suitable to use in automotive builds.
FCC
A legal requirement to sell any communication device (RF) in the United States of America.
Humidity Chamber Test
Similar to our brutal SCA Thermal Chamber Test, but we’ve added humidity to make it even more punishing.
Material Test
Positive Material Identification (PMI) ensures consistent quality of 316 Stainless Steel and Aluminium products. This controls strength and environmental performance.
PROP65
Confirms the exclusion of substances of very high concern in our products, with the aim of protecting human and animal health.
ROHS
Confirms the levels of substances and chemicals in our electrical products, with the aim of protecting human and animal health.Related Products

SC-USB-03
ROKK Charge Pro

In conversation with Teulu Tribe
We catch-up with TeuluTribe, aka, Becka and Zach, to hear their intro to sailing and... Read more

In conversation with Viggo Boats
In this interview we speak with Douglas Matton, Production & Brand Manager at

The ultimate Vanlife Game-Changer

4 trends we saw at boot Düsseldorf

How we reduced our plastic packaging

In Conversation With Scanstrut...
An insight into the designers behind your much-loved Scanstrut products.
Read more
Optimize Your Radar

Niftylift - Retrofitting to Modernize
Design
Innovation
Partner
Sustainable
Quality