SC-USB-F1
Ultra-fast USB charging for the next generation boater.
Flip Pro is designed for use with either a 12V or 24V input and features 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection and the fastest charging for your device onboard.
Product Information.
Flip Pro is designed for use with either a 12V or 24V input and features 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection for any device and the fastest charging for your device onboard.
When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements. When charging, it quickly locks open to protect your cables when plugged in.
Featuring a super-compact footprint, Flip Pro is constructed from premium, marine-grade materials. and is IPX4 waterproof, making it completely washdown-ready.
Flip Pro is FAST! It will charge at up 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops via the USB-C port. It’s also 2x faster for charging large tablets and is designed to effortlessly charge both an iPad Pro & iPhone at the same time.
USB – C output:
60W max on 24V system
36W max on 12V system
USB – A output:
36W max
The install cut-out matches those of standard USB sockets for easy retrofit or swap of an existing USB charger, allowing you to keep up with the heavier power draws of modern electronic devices.
Universal
• Universal fit for any USB-A or USB-C connectors.
• Fast charge (60W max) up to 2 devices at a time.
• Easy Install, using standard USB mounting hole - 29mm (1 1/8”)
IPX4 waterproof with the cover closed.
Marine Ready
• Internal anti-corrosion protective coating
• UV resistant.
• 316 stainless hinge and spring.
Electrical Information
- Input voltage: 10-30V DC (12/24V System)
- Input current Max: 6A (10A fuse recommended)
- Standby power draw: 0.01W
Important information
The charge cable supplied with your device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast charging laptops.

SC-USB-01
- Indice d’étanchéité IPX4
- Étanche avec 1, 2 ou même 0 câble(s) branché(s)
- La prise fonctionne avec n’importe quel connecteur USB de type A
- La taille standard du barillet s’adapte également aux prises USB existantes.

ROKK Charge+
- Indice d’étanchéité IPX6
- Charge rapide
- Étanche avec 1, 2 ou même aucun câble(s) branché(s)
- Faible encombrement

Flip Pro Max
- IPX4 waterproof when lid is closed
- 12V & 24V
- X2 USB-C ports
- Ultra-low profile

Flip Pro 12V Power Socket
- IPX4 waterproof when the lid is closed
- 120 -150W max power 12V system only
- 12V
- Compact footprint
- Marine-grade materials
- Nickel-Plated copper alloy internal contacts
- Supplied with a front-fit bezel kit

Flip Pro Multi
- IPX4 waterproof when the lid is closed
- 12V & 24V
- Compact footprint
- Marine-grade materials

Câble de charge/synchronisation ROKK
- Disponible en deux longueurs durables : 60 cm ou 2 m
- Options de connecteur Apple Lightning ou Micro USB
- Tous les modèles sont dotés d’un noyau de haute qualité qui garantit une charge et une synchronisation ultra-rapides
Pourquoi ROKK Charge+ est-il jusqu’à 3 fois plus rapide que les autres prises USB ?
Le PCB (circuit imprimé) à l’intérieur de ROKK Charge+ permet à l’appareil de recevoir une charge similaire à celle d’un chargeur secteur.
Pourquoi la gamme de chargeurs de Scanstrut est-elle différente des autres soi-disant « chargeurs USB étanches » du marché ?
Notre gamme de chargeurs USB reste étanche même lorsque la prise est utilisée. Les autres chargeurs USB ne sont étanches que lorsqu’ils ne sont pas utilisés et que le couvercle est en place.
Puis-je remplacer une ancienne prise USB par une version Scanstrut ?
Dans la plupart des cas, il s’agit d’un échange facile, il suffit de retirer l’ancienne version et nos barillets USB s’insèrent dans le trou existant et d’ajouter une ou plusieurs vis autotaraudeuses si nécessaire.