SPR-1u-RM
The cleanest way to mount your small electronics on a rail.
Our Rail Pod allows you to install your small screens, switches, controllers, chain counters and more onto any standard or curved rail. Waterproof internal cable routing allows you to seamlessly run your cables through the bottom of the pod, the machined aluminium clamp and into the rail.
Waterproof internal cable routing allows you to seamlessly run your cables through the bottom of the pod, this gives you the cleanest and most user-friendly way to mount your small electronics right where you need it the most. Some additional work may be required to the cables and connectors of the device to ensure a suitable fit.
Pod seal is manufactured from a high tear strength silicone; it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time.
As standard, you will receive your SPR-1u-RM uncut
Fits rails from 25mm to 33.7mm (0.98” to 1.33”). Fit your electronic onto standard and curved rails.
Viewing angle can be set upon installation. Cables are routed internally through the clamp and onto the rail.
SPR-1i-RM
- Compatibile con 1 strumento standard
- Adatto a rotaie da 25 mm a 33,7 mm (da 0,98" a 1,33").
- I cavi sono posati internamente nella rotaia.
SPR-7S-RM
- Si adatta a display da 7" o a strumenti standard
- Adatto a rotaie da 25 mm a 33,7 mm (da 0,98" a 1,33").
- I cavi sono posati internamente nella rotaia.
SPR-7-RM
- Compatibile con display da 7" - 8"
- Adatto a rotaie da 25 mm a 33,7 mm (da 0,98" a 1,33").
- I cavi sono posati internamente nella rotaia.
SPR-8-RM
- Compatibile con display da 8" e 9"
- Adatto a rotaie da 25 mm a 33,7 mm (da 0,98" a 1,33")
- I cavi sono posati internamente nella rotaia
