City Water Inlet for RVs: Scanstrut Roam Series

Roam Series

City Water Inlet

SC-R-W2

Deliver fresh water on demand.

Waterproof rated to IP68 and IP69K, the Roam Series City Water Inlet is engineered to withstand the harshest conditions, so you can stay connected to the campsite mains water supply wherever you park.

110mm (4.34") W x 122.6mm (4.83") H x 49mm (1.93") D
IP68/IP69K waterproof - fully dust-tight and can resist close-range, high-pressure water jets
Front: 3/4" GHT thread & Rear: ½ - 14 NPSM PP-GF Male Thread
Suitable for tank flush or clean water
Water on demand, bypass onboard tank
Lid can hold at 90° and hold at 180°
Stainless steel mesh inlet filter keping debris out

3 Year Warranty

Find A Dealer

Request a Callback

Product Details

The Roam Series City Water Inlet delivers fresh water on demand, making it the ideal solution for hassle-free stops at campsites with a mains water supply. Waterproof rated to IP68 and IP69K, it’s engineered to withstand the harshest conditions, so you can stay connected wherever you park.

The front has a standard ¾″ GHT thread and a swivel connection for easy hose attachment and use, while the rear has a ½ - 14 NPSM PP-GF male thread for secure plumbing integration with your onboard water system. An integrated stainless steel mesh filter keeps your system clean by stopping dirt and debris from entering your water tank ensuring safe, reliable water every time you connect.

Compact at just 49 mm (1.92") depth, it offers maximum installation flexibility, even in tight or awkward spaces. Built with Scanstrut marine-grade innovation, this inlet is UV-tested, fully waterproof (IP68/IP69K), and crafted with 316 stainless steel hardware for unmatched durability in any climate.

The Roam Series provides a clean, consistent look across your exterior sockets’ gas, water, power, and more creating a sleek, uniform finish for your adventure-ready van or RV.

Key Features

Stainless steel mesh inlet filter
Water on demand, bypass onboard tank
Front: 3/4" GHT thread
Rear: ½ - 14 NPSM PP-GF Male Thread
Built-in check valve (non-pressure regulated)
Blue locking ring
Waterproof: IP68 / IP69K
Easy to install
Includes mounting foam gasket
Fully sprung lid with 90° holding bump feature
Smallest in class
Single hole saw size across range – 95mm (3 ¾”)

Electrical Information

Front Connection Inlet	316 Stainless Steel 3/4” GHT Female Threaded Swivel Connection
Rear Connection Outlet	1/2 – 14 NPSM Male Thread
Safety Features	• Non-Return Check Valve • Stainless Steel Filter Screen
Materials in Contact with Water	Glass-Filled Polypropylene (NSF-ANSI 61 and WRAS Approved), Stainless Steel, EPDM
Waterproof Rating	IP68, IP69K Front only when lid closed
Certification	CE, ROHS, REACH

Technical

Compatibility Checker

SCA Testing

The testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, Scanstrut design products to be able to thrive in the harshest of outdoor environments.

Before any product is released, it must pass through the rigorous testing program which involves assessments in electrical, mechanical, U.V., corrosion, thermal, and waterproof categories. To ensure the highest level of accuracy, testing is conducted both internally and by independent ISO accredited test houses.

This commitment to quality has earned Scanstrut the approval of renowned names such as Mercury Marine, Grady White Boats, Boston Whaler, Winnebago, Airstream and many more. To learn more about the SCA testing program and certifications, get in touch.

On/Off Road Testing

Simulates real-world performance by rigorously testing the product across varied terrains, including roads and off-road trails

Cycle Testing

Simulates extended long-term use by repeatedly opening and closing a lid to replicate mechanical wear over time.

Water Pressure Test

Evaluates the product’s capacity to endure rising internal pressure, ensuring it maintains structural integrity under extreme conditions.

IP Test

Water and dust protection under test laboratory conditions to international IP standards. We test between IPX4 (waterjet) and IP68 (submersion).

Accelerated UV Material Test

We accelerate the effects of UV exposure to replicate our products usage in extreme tropical climates. We do this to ensure parts do not become brittle, discolour or fail over time.

Thermal Chamber Test

Laboratory chamber running from -40°C (-40°F) to +85°C (185°F) and back to -40°C (-40°F) for 120 cycles, this accelerates material ageing to simulate real world environment.

Temperature Chamber Test

Product placed in a laboratory chamber at high temperatures to ensure our products continue to perform as designed.

Corrosion Test

100-hours of a special formula salt spray that simulates accelerated marine environmental effects on the product.

FEA Analysis

Finite Element Analysis, simulates the behaviour of the design in virtual conditions to allow us to optimise the design before prototyping and physical testing.

C Tick

An identification trademark registered to the ACMA indicates that the equipment complies with the relevant EMC standard.

CE / UKCA

Signifies that our products have been assessed to meet high safety, health, and environmental protection requirements.

FCC

A legal requirement to sell any communication device (RF) in the United States of America.

Humidity Chamber Test

Similar to our brutal SCA Thermal Chamber Test, but we’ve added humidity to make it even more punishing.

Material Test

Positive Material Identification (PMI) ensures consistent quality of 316 Stainless Steel and Aluminium products. This controls strength and environmental performance.