IP Test
Water and dust protection under test laboratory conditions to international IP standards. We test between IPX4 (waterjet) and IP68 (submersion).
Accelerated UV Material Test
We accelerate the effects of UV exposure to replicate our products usage in extreme tropical climates. We do this to ensure parts do not become brittle, discolour or fail over time.
Cable Bend Test
Electrical products are bolted into a specially designed automated jig to mechanically bend the cable -45° to +45° for 3000 cycles. This ensures cables will not fail even after prolonged use.
Thermal Chamber Test
Laboratory chamber running from -40°C (-40°F) to +85°C (185°F) and back to -40°C (-40°F) for 120 cycles, this accelerates material ageing to simulate real world environment.
Cable Twist Test
Electrical products are bolted into a specially designed automated jig to mechanically twist the cable -45° to +45° for 3000 cycles. This ensures cables will not fail even after prolonged use.
Temperature Chamber Test
Product placed in a laboratory chamber at high temperatures to ensure our products continue to perform as designed.
Corrosion Test
100-hours of a special formula salt spray that simulates accelerated marine environmental effects on the product.
On Water Charge Test
Using real life on water temperature data to ensure devices will continue to charge at an acceptable speed in extreme cold and hot temperatures.
On Water Testing Global
Similar to SCA standard on water testing, however we select locations and vessels for more varied and challenging environmental conditions.
FEA Analysis
Finite Element Analysis, simulates the behaviour of the design in virtual conditions to allow us to optimise the design before prototyping and physical testing.
C Tick
An identification trademark registered to the ACMA indicates that the equipment complies with the relevant EMC standard.
CE / UKCA
Signifies that our products have been assessed to meet high safety, health, and environmental protection requirements.
ECE R10
The global automotive standard recognised by RV and Marine OEMs to ensure electrical devices are suitable to use in automotive builds.
FCC
A legal requirement to sell any communication device (RF) in the United States of America.
Humidity Chamber Test
Similar to our brutal SCA Thermal Chamber Test, but we’ve added humidity to make it even more punishing.
Material Test
Positive Material Identification (PMI) ensures consistent quality of 316 Stainless Steel and Aluminium products. This controls strength and environmental performance.
PROP65
Confirms the exclusion of substances of very high concern in our products, with the aim of protecting human and animal health.
ROHS
Confirms the levels of substances and chemicals in our electrical products, with the aim of protecting human and animal health.
SC-USB-F1
Flip Pro
SC-12V-F1
Flip Pro 12V
SC-USB-F2
Flip Pro With Front Fit Bezel
SC-USB-F3
Flip Pro Max
SC-USB-F4
Flip Pro Plus
SC-MULTI-F1
Flip Pro Multi
3 mins Scanstrut Wins Red Dot Award:...
Scanstrut Wins Red Dot Award: Product Design 2026 for Ventura Series
Read more
3 mins Scanstrut wins the iF DESIGN AWARD...
Scanstrut wins the iF DESIGN AWARD 2026
Read more
1 min Inside the Build: Dicot Designs x...
We're proud to be working with Dicot Designs
Read more
4 mins The Nohma Ventura Series Guide!
Wanting to see the perfect installation of the Ventura series? Look no further than Nohma for... Read more
3 mins How to install external sockets on...
When it comes to deciding on the best configuration of external sockets for your RV, there are... Read more
2 mins Is An External Shower Worth It?
Is an external campervan shower connection worth it? In short, yes! Installing an external shower...
Read more
2 mins Scanstrut Named BLA Supplier of the...
Scanstrut Named BLA Supplier of the Year for 2025
Read more
3 mins How to Install A Scanstrut Starlink...
For the best-fitting, purposely designed, and engineered option, here is our tried and tested... Read more
Design
Innovation
Partner
Sustainable
Quality